Can't place traps in ormond ski resort main building

UnicornToots

SUMMARY OF THE ISSUE: Playing on ormond on trapper, entire bottom of main building didn't allow trap placements. top floor allowed placement but nothing on bottom floor. rest of the map was normal.

PLATFORM: steam

STEP BY STEP INSTRUCTIONS ON HOW THE ISSUE OCCURED: loaded into map on trapper, unable to place traps anywhere in main building

VIDEO:

PLAYER LOGS:

• Player logs are required from PC players only.

Rizzo

Could you please attach the logs?

To find them:

1. Press the Windows Key + R to open the "Run" command.
2. In the text box paste the following: %USERPROFILE%\AppData\Local\DeadByDaylight\Saved\Logs
3. Click "OK" - this will open your Dead by Daylight Logs folder.
   • If it does not open the Dead by Daylight Logs folder, it may mean that when installing Dead by Daylight you chose to save your files somewhere else and will need to check there.
4. The file called "DeadByDaylight.log" is your log file

Thank you.

Wezqu

I have logs of this in report about the same thing happening to Hag and causing in some spots where she can place them to make the traps invisible. I think my log that is in the comments of that one has test on both Trapper and Hag in it.

@WhoSoup said:

SUMMARY OF THE ISSUE: When Hag places a trap in some areas of the Ormond Resort main building, the traps are either completely invisible or very faint (from both survivor and killer view). It is possible to see their shadow when Hag's red stain shines over them.

PLATFORM: Steam

STEP BY STEP INSTRUCTIONS ON HOW THE ISSUE OCCURED:

1. Load into Ormond with Hag
2. Place trap between main gen and fireplace
3. Trap is invisible

The video below shows a handful of different spots where this happens

VIDEO:

https://youtu.be/_g9ULKPKgx4

PLAYER LOGS:

https://us.v-cdn.net/6030815/uploads/VMLODF76GRG1/deadbydaylight.log